UL879 8th Edition
Products
Most City municipalities are now requiring sign products comply with UL879 8th Edition even though Underwriters Laboratories (UL) has set September 5th, 2008 for mandatory compliance.
Products that fall under UL879 8th Edition include:
Electrode Boots/Caps Tube Supports GTO Wire
We offer the following products
which comply with UL 879 8th Edition.
GTO-15
Max Wire UL
Voltage Gauge Listed Color/s
15,000 14 Yes Black
Conductor: 14 AWG Tinned copper for high humidity resistance, improved flexibility & solderability. O.D. .270" +/- .005" nom.
Insulation: Highly flexible Integral Sleeved PVC jacket features easy stripping & bending vs. other GTO brands.
Rating: 15,000 VAC per UL 814, UL 814B & UL 1581.
* Compliance with UL 879 8th Edition (mandated Effective Sep. 5th, 2008)
250' Dispenser Box $69.95
STOCKED!
STOCKED!
Integral Sleeved
Integral Sleeved GTO wire features an extra factory "molded on" insulating sleeve which is now required by most municipal sign codes as well as adding an extra insulating layer of protection.
NEW!
NEW!
This is the first
Wet Location UL Listed
wiring system for neon signs!
This "best on the market" system combines GTO cable sleeving, neon electrode insulator boots and other components to create a "UL Listed - Wet Locations" product.
Manufactured from the highest quality materials including the proprietary #3000 Polymeric Blend. This blend was developed through extensive research, testing, and field evaluations. These provide dependability, good flexibility at low and high temperatures, the highest flammability rating 945V, 17000 VT, dielectric withstand, and excellent weathering properties.
This system of products have been awarded patents in the USA and Canada and have both UL and CSA Listings. Their unique design facilitate installation, increase product safety, reduce lighting failures as well as lowering customer service call-backs.
Colors: Black (White & Gray Special Order)
Sizes:
System Products
One-Piece
Boot / Short Stop
This One-Piece Boot/Short Stop may be used on straight neon or double back applications.
WIRING DIAGRAM
ELECTRODE
SLEEVING
SPLICING CHAMBER
BOOT / SHORT STOP
SLEEVING
BOOT / SHORT STOP
USE EXAMPLE #1
ELECTRODE
LOCK-BLOCK SECURES PULL BACK
USE EXAMPLE #2
ELECTRODE
BOOT / SHORT STOP
SLEEVING
*Prevents arcing problems as well as fire hazards.
*Contains high voltage connection.
*Eliminates drilling 1 1/2" holes.
*Eliminates revamping neon units.
*Eliminates labor on installations.
*Eliminates additional cost of housing.
*Eliminates expensive service calls.
*Material: Quality proprietary Masters #3000 Polymeric blend.
*UL Listed and CSA Approved for Dry, Damp and Wet locations.
*Two Year Limited Warranty.
*Made in the USA.
10mm - $134.95 150 count
12mm - $149.95 150 count
13mm - $164.95 150 count
15mm - $169.95 150 count
System Products
Two-Piece
Boot
Two-Piece
Boot
This Two-Piece Boot is used on double back applications.
WIRING DIAGRAM
*Prevents arcing problems as well as fire hazards.
*Contains high voltage connection.
*Eliminates drilling 1 1/2" holes.
*Eliminates revamping neon units.
*Eliminates labor on installations.
*Eliminates additional cost of housing.
*Eliminates expensive service calls.
*Material: Quality proprietary Masters #3000 Polymeric blend.
*UL Listed and CSA Approved for Dry, Damp and Wet locations.
*Two Year Limited Warranty.
*Made in the USA.
10mm - $184.95 75 count
12mm - $179.95 75 count
13mm - $169.95 75 count
15mm - $164.95 75 count
Closed
Open
SPLICE
BOOT
SLEEVING
ELECTRODE
NEON TUBE
GTO CABLE
ON
OFF
Colors: Black (White & Gray Special Order)
Sizes:
One-Piece
Boot / Short Stop
Sleeving
Sleeving
Use this sleeving
with the Boots and Short Stops to create
a water tight system.
*UL Listed and CSA Approved for Dry, Damp and Wet locations.
*This sleeving meets the requirements of N.E.C. 600-32 or other equipment
listed for this purpose.
*This product is intended to sleeve no more than one GTO cable.
*Sleeving is rated 105 degrees C and is UV resistant.
*94-5V flame rating.
*1/2' diameter size.
*15,000 volt maximum rating.
*Sleeving is not intended to be used where the bend radius is less then 1/2".
*This sleeving is intended for the protection of the GTO cable. Splicing may
be done with equipment listed for the purpose.
*Recommended for use in all secondary circuit wiring.
*Two Year Limited Warranty.
*Made in the USA.
Colors: Black (White & Gray Special Order)
Prices:
100 ft. - $129.95
250 ft. - $285.95
Glass Housing Caps
Glass Housing Caps
Use this Glass Housing Cap to eliminate arcing problems, fire hazards & contamination of high-voltage connections
*UL Listed and CSA Approved for Dry, Damp and Wet locations.
*Cap covers the opening of a glass housing.
*Eliminate potential arcing problems
*Eliminate fire hazards.
*Prevents contamination of high voltage connections.
*The only multi purpose housing cap available.
*Two Year Limited Warranty.
*Made in the USA.
Colors: White & Gray
Prices:
#100 Glass Electrode Housing Caps
$269.95 - 150 ct.
#200 Glass Electrode Housing Caps
$359.95 - 250 ct.
#303 Universal Cap for all metal cased Housings
$359.95 - 250 ct.
#303
#200
#100
Shown on PK
(PK not included
High Voltage
Splice Boxes
High Voltage
Splice Boxes
Use these High Voltage Splice Boxes for easy, safe and trouble free installations!
*HVSB-DD model UL Listed and CSA Approved for Dry & Damp Locations.
*HVSB-WL model is UL Listed and CSA Approved for Wet Locations.
*Metal construction meets N.E.C. 370 requirements.
*Secondary circuit can be pre-wired prior to installation.
*Easy access to terminal posts for splicing of secondary conductor (gto).
*One worker can wire the secondary circuit without assistance, which saves a substantial labor cost.
*Secondary short can be pinpointed by the use of a jumper wire between
posts in the splice enclosure.
*Two Year Limited Warranty.
*Made in the USA.
HVSB-DD (Dry & Damp Location) $154.95 12 ct.
HCSB-WL (Wet Location) $229.95 12 ct.
Bonding / Termination
Plates
Bonding / Termination
Plates
Use these
Bonding / Termination Plates for installations through ceilings, walls and raceways.
*UL Listed and CSA Approved for Dry, Damp and Wet Locations.
*Durable metal construction.
*Meets requirements of N.E.C. section 250 when installed per instructions.
* 7/8" I.D. center mounting hole.
*Two Year Limited Warranty.
*Made in the USA.
2 1/2" Diameter Size $49.95 50 ct.
3" Diameter Size $59.95 50 ct.
All Prices and Specifications are subject to change without notice.
Copyright West Coast Custom Designs, LLC.
c
No reproduction in whole or part without express written permission. All Rights Reserved.
Porcelain GTO Supports
THREADED BOLT-DOWN W/BOLT
GTO
HOLE
GTO
GTO
INSTALLED
NEON
CRADLE
*Porcelain Stand-Offs are made of ultra fine electrical grade porcelain for
high dielectric strength requirements.
*GTO routing hole meets or exceeds wire distances in NEC codes.
*Molded-in neon cradle for use as a tube support while the GTO hole can be
used to secure the neon tube to the support with copper tie wire.
*Approximate Dimensions: 2 1/2" H, 1" O.D.
*50 count box.
*Imported.
*White only.
50 count $64.95
NEON TUBE INSTALLED
STOCKED!
STOCKED!
E-Mail: wccdUSA@juno.com
Phone: 480-820-9517
24hr Fax: 480-839-4541
M-F 9am-4pm "West Coast Time" - Closed Weekends
