All Prices and Specifications are subject to change without notice.
Copyright West Coast Custom Designs, LLC.
c
No reproduction in whole or part without express written permission. All Rights Reserved.
* Junction Box Flasher for Neon Transformers or Incandescent loads
* Simple Plug-In installation
* Unit will do both Single Flashing -or- Alternating Flashing.
Single Flashing: Use only one socket.
Alternating Flashing: Use both sockets, one for each set of lights.
* Easy Dial allows Infinite Flash rate between slow and fast.
* Input: 120 Volts/60 Hz AC.
* Output: Each socket can handle 5 amps / 600 watts.
* Convenient Mounting Brackets.
* Must be mounted in a dry location.
* Commercial-Grade for the Sign Industry.
* Cord: 6' Grounded 3-Prong, UL Listed.
* Dimensions: 5" Length, 3" Width, 2 1/2" Tall.
* Made in the USA.
* One Year Limited Warranty.
NOTE: When using this unit to replace an old mechanical unit, you must make sure the common wire (usually white but not always) is wired to the larger spade on the polarized plug. The hot wire is wired to the smaller spade. On light bulbs, the common is the shell (threaded) portion of the bulb. Hot is the tip of the bulb.
Our Plug-In Flasher is as easy as it comes. Simply plug your Neon Transformer or Incandescent load into the unit. Next, plug the Flasher into a grounded 120vt wall outlet... installation complete!
Via the on-board dial, select your own Flashing speed. Can't be any easier than that!
Easy Speed Dial Adjustment
1 and 2-Circuit PLUG-IN FLASHER
* Junction Box Flasher.
* Works with any combination of Neon, Incandescent and LED loads.
* Simple Plug-In installation.
* Easy on board Speed Dial allows Infinite flash speed setting.
* Input: 120 Volts/60 Hz AC.
* Output: Two models, see chart below.
* Convenient Mounting Brackets.
* Must be mounted in a dry location.
* Commercial-Grade for the Sign Industry.
* Cord: 6' Grounded 3-Prong, UL Listed.
* Dimensions: 4" Length, 4" Width, 3" Tall.
* Proudly Made in the USA.
* One Year Limited Warranty.
Easy Speed
Dial Adjustment
Our Plug-In Flasher is as easy as it comes. Simply plug your Neon Transformer or Incandescent load into the unit. Next, plug the Flasher into a grounded 120vt wall outlet... installation complete!
Via the on-board dial, select your own Flashing speed. Can't be any easier than that!
Don't see what you need... try these:
NeonPartsUSA@gmail.com
______________________________________
480-820-9517
Easy Speed
Dial Adjustment
Our Plug-In Flasher is as easy as it comes. Simply plug your Neon Transformer or Incandescent load into the unit. Next, plug the Flasher into a grounded 120vt wall outlet... installation complete!
Via the on-board dial, select your own Flashing speed. Can't be any easier than that!
* Junction Box Flasher.
* Works with any combination of Neon, Incandescent and LED loads.
* Simple Plug-In installation.
* Easy on board Speed Dial allows Infinite flash speed setting.
* Input: 120 Volts/60 Hz AC.
* Output: Each heavy duty socket can handle 8 amp loads (960 watts).
* One of the four outlets is inactive on this model.
* Convenient Mounting Brackets.
* Must be mounted in a dry location.
* Commercial-Grade for the Sign Industry.
* Cord: 6' Grounded 3-Prong, UL Listed.
* Dimensions: 4" Length, 4" Width, 3" Tall.
* Proudly Made in the USA.
* One Year Limited Warranty.
Easy Speed
Dial Adjustment
3 Circuit - PLUG-IN FLASHER
Our Plug-In Flasher is as easy as it comes. Simply plug any combination of Neon, Incandescent and LED loads into the unit. Next, plug the Flasher into a standard 120Vac wall outlet... installation complete!
Via the on-board dial, select your Flashing speed.
Can't be any easier than that!
BNF-3 PRICING
STOCKED
STOCKED
AVAILABLE
NOW!
STOCKED
STOCKED
AVAILABLE
NOW!
STOCKED
STOCKED
AVAILABLE
NOW!
STOCKED
STOCKED
AVAILABLE
NOW!
Some animation look's better with a pause. Pauses in animation allows the brain time to understand what is being acted out.
For a turning wheel, you would not want a pause. But, for animation that mimics other movement such as a butterfly landing, a simple pause will enhance the realism.
If you think your 3 circuit project would benefit from a pause,
then order the 4 circuit model. You will only use 3 of the circuits, allowing the unused 4th circuit to be the pause.
Any Number
Circuits and Effects!
* Junction Box Flasher.
* Works with any combination of Neon, Incandescent and LED loads.
* Simple Plug-In installation.
* Easy on board Speed Dial allows Infinite flash speed setting.
* Input: 120 Volts/60 Hz AC.
* Output: Each heavy duty socket can handle 8 amp loads (960 watts).
* Convenient Mounting Brackets.
* Must be mounted in a dry location.
* Commercial-Grade for the Sign Industry.
* Cord: 6' Grounded 3-Prong, UL Listed.
* Dimensions: 4" Length, 4" Width, 3" Tall.
* Proudly Made in the USA.
* One Year Limited Warranty.
Easy Speed
Dial Adjustment
Our Plug-In Flasher is as easy as it comes. Simply plug any combination of Neon, Incandescent and LED loads into the unit. Next, plug the Flasher into a standard 120Vac wall outlet... installation complete!
Via the on-board dial, select your Flashing speed.
Can't be any easier than that!
BNF-4 PRICING
Flash Pattern: Back-N-Forth
STOCKED
STOCKED
AVAILABLE
NOW!
Flash Pattern: Back-N-Forth
4 Circuit - PLUG-IN FLASHER
FLASH-4 PRICING
4 Circuit - PLUG-IN FLASHER
Flash Pattern: Chase
* Junction Box Flasher.
* Works with any combination of Neon, Incandescent and LED loads.
* Simple Plug-In installation.
* Easy on board Speed Dial allows Infinite flash speed setting.
* Input: 120 Volts/60 Hz AC.
* Output: Two models, see chart below.
* One of the four outlets is inactive on this model.
* Convenient Mounting Brackets.
* Must be mounted in a dry location.
* Commercial-Grade for the Sign Industry.
* Cord: 6' Grounded 3-Prong, UL Listed.
* Dimensions: 4" Length, 4" Width, 3" Tall.
* Proudly Made in the USA.
* One Year Limited Warranty.
FLASH-3 PRICING
FLASH-2 PRICING
3 Circuit - PLUG-IN FLASHER
Flash Pattern: Chase
Flash Pattern: Single Flash -or- Alternating
Similar to photo.
Similar to photo.
Similar to photo.
Similar to photo.
Similar to photo.
Model Number of Flash Pattern Max. AMPs Max. Watts
Circuits Per Outlet Per Outlet
FLASH-2 1 and 2 Single or Alternate 5 Amps 600 Watts
_____________________________________________________________________________
FLASH-3 3 Chase *1 on / 2 off 8 Amps 960 Watts
_____________________________________________________________________________
FLASH-3 3 Chase *2 on / 1 off 5 Amps 600 Watts
_____________________________________________________________________________
BNF-3 3 Back-N-Forth 8 Amps 960 Watts
(1,2,3,2,1,2,3,2,1,2,3 etc.)
_____________________________________________________________________________
FLASH-4 4 Chase *1 on / 3 off 8 Amps 960 Watts
_____________________________________________________________________________
FLASH-4 4 Chase *3 on / 1 off 3 Amps 360 Watts
_____________________________________________________________________________
BNF-4 4 Back-N-Forth 8 Amps 960 Watts
(1,2,3,4,3,2,1,2,3,4,3,2,1 etc.)
_____________________________________________________________________________
FAILING 1 Simulates the Flicker 8 Amps 960 Watts
NEON of a Failing Neon
SIMULATOR Transformer
MODELS AT A GLANCE
Model No. of Circuits Flash Pattern Max. Amps/Watts Per Outlet
__________________________________________________________________________
FLASH-4 4 Chase *1 on / 3 off 8 Amps / 960 Watts
__________________________________________________________________________
FLASH-4 4 Chase *3 on / 1 off 3 Amps / 360 Watts
Model No. of Circuits Flash Pattern Max. Amps/Watts Per Outlet
_________________________________________________________________________
BNF-4 4 Back-N-Forth 8 Amps / 960 Watts
Model No. of Circuits Flash Pattern Max. Amps/Watts Per Outlet
_________________________________________________________________________
BNF-3 3 Back-N-Forth 8 Amps / 960 Watts
Model No. of Circuits Flash Pattern Max. Amps/Watts Per Outlet
__________________________________________________________________________
FLASH-3 3 Chase *1 on / 2 off 8 Amps / 960 Watts
__________________________________________________________________________
FLASH-3 3 Chase *2 on / 1 off 5 Amps / 600 Watts
Model No. of Circuits Flash Pattern Max. Amps/Watts Per Outlet
_________________________________________________________________________
FLASH-2 2 Single or Alternate 5 Amps / 600 Watts
Old School
Mechanical
Units
Solid-State
Controllers
