MASTERS-TECHNOLOGY

Use this sleeving

with the Wet Listed Boots and Short Stops we sell to create a water tight system.

*UL Listed for Dry, Damp and Wet locations.

*This sleeving meets the requirements of N.E.C. 600-32 or other equipment listed for this purpose.

*This product is intended to sleeve no more than one GTO cable.

*Sleeving is rated 105 degrees C and is UV resistant.

*94-5V flame rating.

*1/2' O.D. (outer diameter), 3/8" I.D. (inner diameter).

*15,000 volt maximum rating.

*Sleeving is not intended to be used where the bend radius is less than 1/2".

*This sleeving is intended for the protection of the GTO cable. Splicing may be done with equipment listed

for the purpose.

*Recommended for use in all secondary circuit wiring.

*Two Year Limited Warranty.

*Made in the USA.

ALL SALES FINAL on Masters Technologies Product. No returns, refunds or exchanges.

50 ft. Colors: Black $

*GTOS-1

GTO Wire Sleeving

Photo show's GTO wire in sleeving. GTO not included.

NeonPartsUSA@gmail.com

______________________________________

480-820-9517

Home Page

Place Order

What's New

Bonding / Termination Plates

Use these

Bonding / Termination Plates for installations through ceilings, walls and raceways.

*UL Listed and for Dry, Damp and Wet Locations.

*Durable metal construction.

*Meets requirements of N.E.C. section 250 when installed per instructions.

* 7/8" I.D. center mounting hole.

*Two Year Limited Warranty.

*Made in the USA.

ALL SALES FINAL on Masters Technologies Product. No returns, refunds or exchanges.

2 1/2" Diameter Size * MT-BDP-2 $ 50 ct.

3" Diameter Size * MT-BDP-3 Sold Out!

Neon Electrode Housing Caps

#100 Glass Housing Cap

*Fits #100 glass housings.

*White or Gray

*30, 100 or 250ct. *Check for Availability

Part # WPB-100-EGH

#200 Glass Housing Cap

*Fits #200 glass housings.

*White or Gray

*30, 100 or 250ct. *Check for Availability

Part # WPB-200-EGH

#303 Glass Housing Cap

*Universal cap fits all metal

cased glass housings.

*White or Gray

*30, 100 or 250ct. *Check for Availability

Part # WPB-303-EMH

*Eliminate potential arcing problems

and fire hazards.

*Prevent contamination of

high-voltage connections.

*Easy, safe and trouble-free installation.

MASTERS TECHNOLOGY

Bonding Termination Plate Installation Example

All Prices and Specifications are subject to change without notice.

Home Page

Place Order

What's New

Copyright West Coast Custom Designs, LLC.

High Voltage Splice Boxes

Use these High Voltage Splice Boxes for easy, safe and trouble free installations!

*HVSB-DD model UL Listed for Dry & Damp Locations.

*HVSB-WL model is UL Listed for Wet Locations.

*Metal construction meets N.E.C. 370 requirements.

*Secondary circuit can be pre-wired prior to installation.

*Easy access to terminal posts for splicing of secondary conductor (gto).

*One worker can wire the secondary circuit without assistance, which saves a substantial labor cost.

*Secondary short can be pinpointed by the use of a jumper wire between posts in the splice enclosure.

*One Year Limited Warranty.

*Made in the USA.

ALL SALES FINAL on Masters Technologies Product. No returns, refunds or exchanges.

HVSB-DD (Dry & Damp Location) * MT-HVSDD $ Sold Out!

HCSB-WL (Wet Location) * MT-HVSBW 20 lbs. $ Sold Out!

Material: Masters Blend 3000

UL Listed: Yes

Made in the USA

Count: 75-Count

Color/s:

Sizes: 10mm 12mm 13mm 15mm 16mm

BLACK

WHITE

GRAY

10mm

12mm

13mm

2-Piece Cap

Pictured Closed

Pictured Open

15mm

16mm

SLEEVING

GTO

This "best on the market" system combines GTO cable sleeving, neon electrode insulator boots and other components to create a

"UL Listed - Wet Locations" product.

Manufactured from the highest quality materials including the proprietary #3000 Polymeric Blend. This blend was developed through extensive research, testing, and field evaluations. These provide dependability, good flexibility low and high temperatures, the highest flammability rating 945V, 17000 VT, dielectric withstand, and excellent weathering properties.

This system of products have been awarded patents in the USA and Canada and are UL Listed. Their unique design facilitate installation, increase product safety, reduce lighting failures as well as lowering customer service call-backs.

ALL SALES FINAL on Masters Technologies Product. No returns, refunds or exchanges.

2-Piece Electrode Cap/Boot

MASTERS TECHNOLOGY