NeonPartsUSA@gmail.com
______________________________________
480-820-9517

GTO WIRE
GTO-10
Max           Wire           UL      

Voltage       Gauge       Listed                Color/s

10,000           18             Yes                    Black

Conductor: 18 AWG soft stranded tinned annealed copper. 
                  Stranding 19/.0092"
Insulation: High dielectric strength single extrusion. O.D. .215".
Rating: 10,000 VAC, 105 Degrees C.

* Meets the construction requirements of UL Standard UL814 for GTO-10.
* Meets the construction requirements of CSA C22.2 No. 127.99.
GTO-15
Max           Wire           UL      

Voltage       Gauge       Listed                Color/s

15,000           14             Yes                    Black

Conductor: 14 AWG bare copper. Stranding 19/.047".
Insulation: Polyvinyl Chloride Blend. Wall thickness .098" O.D.
                 .265" +/- .005 nom.
Rating: 15,000 VAC, 105 Degrees C.
* Meets the construction requirements of UL Standard UL814 for GTO-15.
* Meets the construction requirements of CSA C22.2 No. 127.99.
O.D. .265"
O.D. .215"
GTO  SIZE  COMPARISON  CHART
1
2
All Prices and Specifications are subject to change without notice.

Copyright West Coast Custom Designs, LLC. 
c
No reproduction in whole or part without express written permission. All Rights Reserved.
250' Dispenser Box      
* GTO-10
250' Dispenser Box      
* GTO-15-BLK
Porcelain GTO Supports
THREADED BOLT-DOWN W/BOLT
GTO 
HOLE
GTO
GTO 
INSTALLED
NEON
CRADLE
*Porcelain Stand-Offs are made of ultra fine electrical grade porcelain for 
  high dielectric strength requirements.
*GTO routing hole meets or exceeds wire distances in NEC codes.
*Molded-in neon cradle for use as a tube support while the GTO hole can be
  used to secure the neon tube to the support with copper tie wire.
*Approximate Dimensions: 2 1/2" H, 1" O.D.
*40 count box.
*Imported.
*White only.

50 count      * P-SUPPORTS
 NEON TUBE INSTALLED
High Voltage Splice Boxes
Use these High Voltage Splice Boxes for easy, safe and trouble free installations!
*HVSB-DD model UL Listed for Dry & Damp Locations.
*HVSB-WL model is UL Listed for Wet Locations.
*Metal construction meets N.E.C. 370 requirements.
*Secondary circuit can be pre-wired prior to installation.
*Easy access to terminal posts for splicing of secondary conductor (gto).
*One worker can wire the secondary circuit without assistance, which saves  a substantial labor cost.
*Secondary short can be pinpointed by the use of a jumper wire between posts in the splice enclosure.
*Two Year Limited Warranty.
*Made in the USA.

ALL SALES FINAL on Masters Technologies Product. No returns, refunds or exchanges.
HVSB-DD (Dry & Damp Location)   * MT-HVSDD       $ Sold Out!

HCSB-WL (Wet Location)   * MT-HVSBW       20 lbs.           $ Sold Out!
GTO ACCESSORIES
O.D. .265"
3
2
1
GTO-15 Silicone
Max           Wire           UL      

Voltage       Gauge       Listed                Color/s

15,000           14             Yes               Black / White

Conductor: 14 AWG tinned copper. Stranding 19/.047".
Insulation: Silicone. Wall thickness .098" 
                 O.D. .265" +/- .005 nom.
Rating: 15,000 VAC, 150 Degrees C.
* Sunlight Resistant Dielectric.
* UL 879 Compliant
SILICONE!
3
250' Dispenser Box    
* GTO-15-1S-BLK
* GTO-15-IS-WHT
3
SILICONE!
Integral Sleeve
By The Foot ............  per ft.
With 10 ft. Minimum

* GTO-10-FT
By The Foot ............  per ft.
With 10 ft. Minimum

*GTO-15-FT
By The Foot ............ per ft.
With 10 ft. Minimum

* GTO-15-IS-FT
UL Listed                             Paige Electric
UL Listed                             Paige Electric
UL Listed                             Paige Electric
O.D. .265"
Use this sleeving 
with the Wet Listed Boots and Short Stops we sell to create a water tight system.
*UL Listed and for Dry, Damp and Wet locations.
*This sleeving meets the requirements of N.E.C. 600-32 or other equipment listed for this purpose.
*This product is intended to sleeve no more than one GTO cable.
*Sleeving is rated 105 degrees C and is UV resistant.
*94-5V flame rating.
*1/2' O.D. (outer diameter), 3/8" I.D. (inner diameter).
*15,000 volt maximum rating.
*Sleeving is not intended to be used where the bend radius is less than 1/2".
*This sleeving is intended for the protection of the GTO cable. Splicing may be done with equipment listed
 for the purpose.
*Recommended for use in all secondary circuit wiring.
*Two Year Limited Warranty.
*Made in the USA.

ALL SALES FINAL on Masters Technologies Product. No returns, refunds or exchanges.


50 ft. Color:  Black    

*GTOS-1  
      
GTO Wire Sleeving
Photo show's GTO wire in sleeving. GTO not included.
AUTO STROBE
*Porcelain Federal Bushings are designed to allow safe passage of GTO
 cable thru raceway barriers.
*Helps prevent fire and shock hazards as well as further protecting the GTO.
*Provides safe GTO cable protection with electrical grade porcelain surface
  that protects in accordance with NEC code.
*Exposed head features a baked-on gloss black porcelain glaze finish. 
*Each Federal Bushing comes assembled with a die-cast lock-nut attached to
  the threaded ceramic Federal Bushing neck.
*For proper installation, the minimum hole size in the sheet metal shall be
 13/16" and the maximum hole size allowed should not exceed 15/16".
*Dimensions: 1 1/16" L, 1 3/16" O.D.
* UL Listed
*100 count box.
*Imported.
*Black, White or Antique White finish.

Each  
* F-BUSH-BLK
* F-BUSH-WHT 
* F-BUSH-AW

100 count 
* F-BUSH-CASE-BLK
* F-BUSH-CASE-WHT
* F-BUSH-CASE-AW   
Die-Cast Lock Nut
1  3/16"
3/4"
1  1/16"
*All dimensions 
are approximate.
NEW!
Black finish pictured
BLACK             WHITE           BROWN
Porcelain Federal Bushings
One-Time Special Run

"Antique White"
Federal Bushings

*For Restorations!
*Perfect for creating 
 faux-old signs!

Each 

100 count   
# F-BUSH-CASE-AW

Porcelain Federal Bushings
>>> OUT OF STOCK <<<
Unavailable From Manufacturer
  • GTO Sleeving
  • Porcelain GTO Supports
  • Porcelain Federal Bushings
  • High-Voltage Splice Boxes
  • Bonding Termination Plates
  • In-Line GTO Splicers
SCROLL DOWN for items:
Bonding / Termination Plates
Use these 
Bonding / Termination Plates for installations through ceilings, walls and raceways.
*UL Listed and for Dry, Damp and Wet Locations.
*Durable metal construction.
*Meets requirements of N.E.C. section 250 when installed per instructions.
* 7/8" I.D. center mounting hole.
*Two Year Limited Warranty.
*Made in the USA.

ALL SALES FINAL on Masters Technologies Product. No returns, refunds or exchanges.
2 1/2" Diameter Size   * MT-BDP-2            

3" Diameter Size  * MT-BDP-3                    
MASTERS TECHNOLOGY
Bonding Termination Plate Installation Example
In-Line GTO Splicers
*Approx. Dimensions: 5" L,  13/16" O.D.
*Imported.

*White - # ILS-WHITE
*Black - # ILS-BLACK


>>> OUT OF STOCK <<<
Unavailable From Manufacturer
>>> OUT OF STOCK <<<
Unavailable From Manufacturer
>>> OUT OF STOCK <<<
Unavailable From Manufacturer
GTO-5 DISCONTINUED!
BROWN
SOLD
OUT!