All Prices and Specifications are subject to change without notice.

Copyright West Coast Custom Designs, LLC. 
c
No reproduction in whole or part without express written permission. All Rights Reserved.
NeonPartsUSA@gmail.com
______________________________________
480-820-9517

Movie * TV * Rental * Residential * Commercial * Restaurant
Dimming Neon Transformers
Wall
Outlet
Neon
Transformer
Plug
AUTO STROBE
AUTO STROBE
Simulated
"FAILING NEON"
Plug-In Controller
Failing neon signs are a special-effects staple that Writers and Directors insist on including in productions to set the mood and to simply add that touch of realism. Just think back, remember a play, movie or television show featuring a hotel neon sign outside the room window where a portion of the sign was randomly blinking? 

Our Failing Neon Controllers are used by Television and Movie production companies as an easy, affordable and reliable way to simulate failing neon signs. 
Easy as 1-2-3!
*Simply plug the neon transformer into the controller. 
*Plug the controller into 110vts.
*Adjust the controller knob to the desired effect.
Movie & TV
Special Effect
Model                 No. of Circuits              Flash Pattern                Max. Amps/Watts Per Outlet
________________________________________________________________________________

FNC-REG                     1                   Constant Flickering                 8 Amps / 960 Watts      
SPEC'S
*Commercial heavy-duty construction.
*Maximum total load 8 Amps.
*Input: 120vts/60HZ.
*Two grounded outlets output the same effect  
 simultaneously.
*Best when used on a magnetic transformer.
*Long grounded power cord.
*Approximately 4" L, 4" W, 3" H.
*Made in the USA.
*One Year Limited Warranty.

$199.95 
#1
Full-Time Flicker    
Similar to photo
STOCKED
STOCKED
AVAILABLE
NOW!
AUTO STROBE
Model                 No. of Circuits              Flash Pattern                Max. Amps/Watts Per Outlet
_______________________________________________________________________________

FNC-SWCH                 1                 Flicker  -or-  Constant On             8 Amps / 960 Watts      
SPEC'S
*Commercial heavy-duty construction.
*Maximum total load 8 Amps.
*Input: 120vts/60HZ.
*Two grounded outlets output the same effect  
 simultaneously.
*Best when used on a magnetic transformer.
*Long grounded power cord.
*Approximately 4" L, 4" W, 3" H.
*Made in the USA.
*One Year Limited Warranty.

$224.95 
#2
"Switched"  Flicker / Constant On  
Movie, Television and Stage
Similar to photo
STOCKED
STOCKED
AVAILABLE
NOW!
*On-Board switch allows user to toggle between
the failing neon effect  -and-  constant on.
*Constant failing neon effect.
AUTO STROBE
Model                 No. of Circuits              Flash Pattern                Max. Amps/Watts Per Outlet
________________________________________________________________________________

FNC-SWCH-2                1            Flicker  -or-  Flicker w/On                 5 Amps / 600 Watts      
SPEC'S
*Commercial heavy-duty construction.
*Maximum total load 5 Amps.
*Input: 120vts/60HZ.
*One grounded outlet.
*Best when used on a magnetic transformer.
*3 foot grounded power cord.
*Approximately 3 1/4" L, 3 1/4" W, 2 1/2" H.
*Made in the USA.
*One Year Limited Warranty.

$224.95 
#3
"Switched"  Flicker / Flicker w/On  
Similar to photo
STOCKED
STOCKED
AVAILABLE
NOW!
*On-Board switch allows user to toggle between
constant flicker  -and-  flicker with periods of constant on.
3 Different Models
( see below )
MODELS
Model: E-DIM-8

Input: 120vt/60hz - 0.63 Amp.
Output: 8,000vt - 30mA

* On-Board full-range Dimming Knob.
* Complies with Secondary Ground Fault UL 2161.
* UL Listed
* Self Adjusting to neon load.
* Absolutely NO mercury migration.
* Case size: 20 units.
* Auto Shutdown & Overload Protection.
* Yes... it CAN be mounted directly to metal surfaces.
* 8" length, 2" wide, 1 1/4" thick.
* 6' grounded cord. 
* On-the-Cord on/off switch.
* 18" GTO wires.
* Indoor use only.
* Imported
* Warranty:   End User: Limited 6 month 
                      Original Purchaser in Sign Industry: Limited 1 Year
Full-Range Dimming Knob                  On-the-Cord On/Off Switch
15mm  12mm  10mm                         15mm  12mm  10mm
29'       24'        22'                              37'       28'       21'
      NEON                   Footage Chart                ARGON
When calculating footage, lease add 1' for each pair of electrodes.
Model # E-DIM-FLA-12  (CPI-12042)    *12,000vts 
Input: 120vt/60hz - 2.36 Amp.
Output: 12,000vt - 42mA

* Complies with Secondary Ground Fault 
   in UL 2161.
* Self Adjusting to neon load.
* Self Adjust's from 2,000vts - 12,000vts.
* On-board Dimming knob and Flashing knob 
  • *Knob #1: Constant-On -or- choose flashing rate
  • *Knob #2: Dimming
* Case size: 12 units.
* Auto Shutdown & Overload Protection.
* Yes... it CAN be mounted directly to metal surfaces.
* 9 1/2" length, 2 1/2" wide, 1 3/4" thick.
* 6' grounded cord. Features on/off pull-chain.
* 24" GTO wires.
* Indoor use only.
* Imported
* Warranty:   End User: Limited 1 Year 
                      Original Purchaser in Sign Industry: Limited 2 Year
15mm  12mm  10mm                         15mm  12mm  10mm
46'       35'        31'                              55'       42'       37'
      NEON                   Footage Chart                ARGON
When calculating footage, lease add 1' for each pair of electrodes.
9  1/2"
2  1/2"
8  3/4"
1  3/4"
6' Power Cord
2' GTO
Wires