Brass Electrode Caps are used on the tips of tubulated electrodes to help protect them from damage. Our Caps are stamped using premium 100% brass and feature two separate holes for sliding each electrode wire through. Our caps feature "clean electrode holes" - no flashing material is left hanging from the hole!
**Brass Electrode Caps MUST be used on all of our Neon Sculpture Bases. Refer to each base info for proper cap size required.
ITEM
12mm Short
12mm Long
15mm Short
15mm Long
DIMENSIONS
.615" L, .45" Dia.
.87" L, .45" Dia.
.615" L, .575" Dia.
.935" L, .575" Dia.
mix & mAtCh Brass Cap Sizes for Quantity Discount
12mm 15mm
1 - 99
.12 ea.
.12 ea.
.12 ea.
.12 ea.
100+
.11 ea.
.11 ea.
.11 ea.
.11 ea.
SHORT LONG SHORT LONG
1/2" 1" 1/2" 1"
*REFER TO CHART FOR EXACT DIMENSIONS
1000+
.10 ea.
.10 ea.
.10 ea.
.10 ea.
All prices subject to change without notice.
No reproduction in whole or part without express written permission. All Rights Reserved.
Copyright West Coast Custom Designs, LLC.
Brass buttons provide breakage protection and electrical conducting surfaces for electrodes when placed inside housings. Electrode buttons (aka: penny caps) are intended for use on 12, 13 and 15 mm electrodes. Each have two holes for insertion of the electrode leads. Made using premium 100% brass.
