CLOCK PARTS
Replacement Clock Mechanism's
S-T-E-P Action
S-T-E-P Action


AA Battery Operated

1 - 9  $ 10.00                10 - 24  $9.00                 25+  $8.00
* Quality SEIKOTM brand.
* Includes: Mechanism, hanging
  bracket, brass washer & nut.
* AA Battery operation.
* 2 1/4" x 2 1/4" x  9/16" Thick.
* Battery not included.
* S-T-E-P second hand action.
* Replacement for our 16" and 20" neon clocks.
* Imported.
Rear              Front        Washer & Nut
Hanging Bracket
S-T-E-P
Second Hand


120vt Operated Clock Mechs

* Quality SYNCHRON brand.
* Comes fully assembled as pictured above.
* Includes: Mechanism, brass gearbox, brass retaining nut &  
  minute hand retaining nut.
* 1 RPM (of course... it's a clock).
* 120vt operation.
* SWEEP second hand.
* Replacement for our 24" neon clocks.
* Made in the USA.


Side View                                                    Rear View
Time Adjusting
Shaft
120vt Input Wires
Nuts
Hands
Shaft
Clock Motor
Brass
Gear Box
Replacement Power Cords
Longer
No reproduction in whole or part without express written permission. All Rights Reserved.
Copyright West Coast Custom Designs, LLC.
Hand Set add $6.00
Nuts
Clock Mech
NeonPartsUSA@gmail.com
______________________________________
480-820-9517

Time Setting Rod & Linkage
This time setting rod linkage attaches to the 120-volt clock movement via included coupler and cotter pins. The rod linkage allows setting the time on the outside of the clock housing.



Style 1  *Standard
9" overall length

$9.95 ea.




Style 2   *Deluxe

4" overall length - $9.95

10 1/4" overall length - $16.95
ACCESSORIES
Clock Hand Sets
For use with Style 1 and Style 2 Clock mechs.
Style 1  *Regular $19.95 per set
SEC.
HOUR
MIN.
End to End
Post to Tip
End to End

Second - 6"

Minute - 7 1/8"

Hour - 5 3/8"
Post to Tip

Second - 4 1/4"

Minute - 5 1/4"

Hour - 3 1/2"
Style 2  *Deluxe $24.95 per set
End to End

Second - 6"

Minute - 6 1/4"

Hour - 5 1/2"
Post to Tip

Second - 4 1/2"

Minute - 6"

Hour - 5 1/4"
SEC.
HOUR
MIN.
End to End
Post to Tip
1+ $49.95 ea.
10+ $48.95 ea.
25+ $45.95 ea.
Spinning Disc
Brass Nuts
For use with Style 2 mech. Replaces damaged or lost nuts which mount
the spinning disc onto the clock
mech shaft. Individually hand
machined out of quality brass.

$6.00 ea.
1+ $49.95 ea.
10+ $48.95 ea.
25+ $45.95 ea.
Style 1 
*2-wire non-grounded
*6ft length
*Black
*On-the-cord thumb switch
*SPT-1
*UL Listed

$3.50 ea.



Style 2 
*3 -wire grounded
*8ft length
*Black
*UL Listed

$4.95 ea.
Style 1
Style 2
NEW!
Replacement Clock Neon Transformers
New Clock Mech
Corrosion Kills the Mech
New Chrome Bezel (exterior view)
Corrosion Leaching
New Chrome Bezel (underside view)
Massive Corrosion
New Switch (interior view)
Corrosion is taking over
Words of Wisdom and Caution...

There are two types of neon transformer's - core and coil (pictured) and electronic.

Core and coils have been used since the beginning of neon. All antique neon clocks would have used a core and coil transformer.

We STRONGLY suggest the use of "core and coil" type neon transformer/s in clocks made of metal. When an electronic type neon transformer is used in a metal clock, you run the risk of corrosion of any/all metal part/s. The corrosion actually eats away at metal parts... destroying the parts.

Antique clocks are highly collectable and in great demand, making them very valuable. Taking a chance on destroying the clock by installing an electronic type transformer is just not worth it.

Check out the following examples of the early stage damage caused by an electronic type transformer installation in a metal clock.
FIRST...
What type of mech do you need?
1
Regular Clock                                      Spinner Clock
2
#1  Side Set - Regular Clock
*Fully assembled.
*Includes clock works and motor.
*Includes machined main installing nut
   and minute nut.
*Side set... which means the time setting
  rod goes out to the side of the clock case.









#2   Side Set - Spinner Clock
Features a longer than normal
second-hand shaft so that a
spinning disc can be attached.

*Fully assembled.
*Includes clock works and motor.
*Includes machined main installing nut
   and minute nut.
*Side set... which means the time setting
  rod goes out to the side of the clock case.









#3  Rear Set - Regular Clock
*Fully assembled.
*Includes clock works and motor.
*To install, the mech is attached to the
  clock face using the four mounting tabs.
*Rear set... which means the time setting
  rod goes out the back side of the clock case.









#4   Rear Set - Spinner Clock
Features a longer than normal
second-hand shaft so that a
spinning disc can be attached.

*Fully assembled.
*Includes clock works and motor.
*To install, the mech is attached to the
  clock face using the four mounting tabs.
*Rear set... which means the time setting
  rod goes out the back side of the clock case.
1+ $49.95 ea.
10+ $48.95 ea.
25+ $45.95 ea.
1+ $49.95 ea.
10+ $48.95 ea.
25+ $45.95 ea.
Shorter
$5.95 each